V2ray Mikrotik [extra Quality]

I can provide the exact configuration scripts for your specific network topology. Share public link

/ip/firewall/nat/add chain=srcnat src-address=172.16.10.0/24 action=masquerade Use code with caution. Step 3: Prepare the V2Ray Configuration File

MikroTik’s Container feature (introduced in RouterOS v7) makes running V2Ray directly on the router possible. Below is a step-by-step guide to configuring V2Ray on MikroTik using Containerization and Policy-Based Routing. Prerequisites and Requirements v2ray mikrotik

This method uses on the MikroTik router to forward targeted LAN traffic to a local V2Ray gateway pool. Step 1: Configure the V2Ray Client Gateway

If you only want specific devices (like TVs or specific PCs) to use the V2Ray tunnel: Go to your device's network settings. Configure the system proxy manually. I can provide the exact configuration scripts for

/ip/firewall/nat/add chain=dstnat protocol=tcp dst-port=80 action=redirect to-ports=8080 comment="Redirect HTTP to V2Ray Parent Proxy" Use code with caution.

: She set up the Veth interfaces, tagging the traffic. She wrote a specific firewall rule: any device connected to the "Freedom" SSID would have its traffic quietly handed off to the V2Ray container. Below is a step-by-step guide to configuring V2Ray

In the world of networking, is often seen as the rugged, reliable workhorse—a router that can do almost anything if you know which terminal commands to whisper to it.

A local Linux machine/container to act as the proxy gateway (if not using RouterOS v7 containers). Step-by-Step Configuration: Transparent Proxy Method

To guarantee low latency and high availability, configure the following optimization tweaks: FastTrack Exceptions