Nokia 7250 Ixr X1 Installation Guide Fix

enter private

: Connect the dedicated Ethernet management port to your Out-of-Band (OOB) management network. : The system typically boots from an internal 80GB SSD Alcatel-Lucent Enterprise 5. Perform Initial Software Boot

+-------------------------------------------------------------+ | [ Power Supply 1 ] [ Power Supply 2 ] [ Fan Tray 1 ] | | [ AC / DC ] [ AC / DC ] [ Hot-Swappable] | +-------------------------------------------------------------+ Installing Fan Trays nokia 7250 ixr x1 installation guide

Connect the opposite end of the grounding wire to your facility’s central office ground or data center ground ring. 5. Installing Fan Trays and Power Supplies

Secure the brackets using the flat-head screws provided in the mounting kit. Tighten to a torque specification of roughly 10 in-lbs (1.1 N-m). enter private : Connect the dedicated Ethernet management

: Connect to the console, management, or USB ports as needed for initial configuration. 4. Software Boot and Initialization

Insert the required SFP, SFP+, or QSFP transceivers into the front-panel optical ports until they click into place. : Connect to the console, management, or USB

Tighten the captive thumb screws clockwise to lock the module in place. Installing Power Supply Units (PSUs) The system supports dual AC or DC power supplies for redundancy.

Blinks during boot-up and should stabilize to green once SR OS (Service Router Operating System) initializes successfully.

Detailed technical documentation for the platform is available through the 7250 IXR Hardware Documentation Hub .

Launch your terminal application and apply the following connection parameters: 115200 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None Initial Boot and Login Verification