Send & receive SMS and MMS from your computer or tablet, using your current Android phone number. Messages stay in sync with your phone's SMS inbox.
Never miss notifications from apps like Uber, WhatsApp, Snapchat, and Instagram.
You can even dismiss them right from your desktop.
Instantly & securely store photos & videos taken from your phone to your computer or tablet.
Dead simple, 1-click photo sharing.
Note: For security, it is highly recommended to change these defaults upon first login [25, 27]. 0;54; Navigating the Menu Structure 0;16;
Connect the Mobotix M10 to your network switch or directly to your computer using an Ethernet cable.
A prompt will appear asking for a username and password.
The M10 is likely sitting on a different subnet than your modern local network. You must temporarily change your computer's IP address to match the camera's subnet. Go to your computer’s network adapter settings. mobotix m10 open menu
From the Live screen, you have access to two distinct but equally important menu structures. The is where you perform all core administrative and security tasks, while the Setup Menu focuses on fine-tuning the camera's operational and image-related features.
Look at the factory label on the back or bottom of the Mobotix M10 housing to find the MAC address (e.g., 00:03:c5:01:22:3a ).
The MOBOTIX M10 uses Power over Ethernet (PoE). Ensure it is connected to a compatible PoE switch or a proprietary MOBOTIX network power injector. Note: For security, it is highly recommended to
If the camera is set to factory defaults, it will use a pre-assigned IP address derived from its serial number. 10.x.x.x
If the default credentials do not work, the password was likely changed. You will need to perform a hardware reset using the reset button located under the camera's outer casing to restore factory defaults.
For one second, nothing happened. The camera's status LED flickered yellow. The M10 is likely sitting on a different
After you log in, you will see the live video view. You can now access the two main menus to change your settings. Look for the buttons at the top or side of the screen. The Admin Menu
: Use Setup Menu > Event Settings to configure motion detection and alarm triggers [11].
If credentials are lost, follow the manufacturer's instructions for a hardware reset using the physical button on the device to restore factory defaults.