Hp Mu06 Notebook Battery Pinout Configuration [better]
protocol (Standard Battery System) for communication with the laptop's motherboard Orientation
Because the SMBus protocol is derived from I2C, you can use standard I2C libraries to pull smart battery data (SBS data protocol standards).
Before looking at the specific pins, it helps to understand the internal architecture of the pack. Lithium-ion (Li-ion) Hp Mu06 Notebook Battery Pinout Configuration
HP MU06 notebook battery is a widely used Li-ion battery pack with a standard 9-pin blade connector
Use this information at your own risk. Always discharge the battery to <20% before probing, and never short adjacent pins. Always discharge the battery to <20% before probing,
The MU06 is compatible with a wide array of HP part numbers. If your battery matches any of the following, the pinout configuration above applies: 593553-001 593554-001 HSTNN-LB0W HSTNN-CBOX
: The MU06 is a 6-cell Li-ion pack arranged in a 3S2P (3 Series, 2 Parallel) configuration, providing a nominal voltage of 10.8V and roughly 4.4Ah (47Wh) . Are you trying to , build a DIY
Are you trying to , build a DIY power bank , or interface with an Arduino/microcontroller ?
Laptop batteries operate at ~11.55V to 12.6V and can deliver high current. Do not short pins. Use a multimeter, not trial and error.