If the device is supposed to be , cycle the button until it reads OFF , then press it once more so it displays AUTO OFF . 6. Safety Warnings and Maintenance
He hit 'START'.
Internal rechargeable NiMH battery (retains programs during power outages) Minimum Time Setting: 1 minute Operating Temperature: 32°F (0°C) to 131°F (55°C) 2. Safety Precautions & Installation Instructions Safety Warnings chevron digital timer ew-32 user manual
Plug the timer into an active wall outlet for 30 minutes. If it remains blank, use a paperclip to press the MASTER CLEAR button.
Connect the timer wire to the Line (Hot) or Load wire, depending on which side of the 3-way circuit the timer is installed. If the device is supposed to be ,
Are you running into an or layout issue on your screen?
Chevron Digital Timer EW-32 User Manual & Programming Guide The Chevron Digital Timer EW-32 is a versatile, energy-efficient programmable wall switch designed to automate indoor and outdoor lighting, fans, and appliances. By replacing a standard wall switch, this timer enhances home security and reduces utility costs. Connect the timer wire to the Line (Hot)
Providing these details helps tailor a custom scheduling solution for your timer. Share public link
Before first use or after a long period of non-use, plug the timer into a wall outlet and charge it for to power the internal memory backup battery. : Use a paper clip or pin to press the button to clear all previous settings. Setting the Current Time Press and hold the button for 3 seconds to enter time setting mode. buttons to adjust the current , then press to confirm. buttons to set the , then press buttons to set the , then press to finalize the current clock. Programming ON/OFF Cycles
Press the PROG button again. The screen will display "1 OFF". Repeat the step above to set the day and time you want the device to turn off.
Disables or restores a specific program slot. 3. Initial Setup: Resetting and Charging