⚠️ Do not use power drills or electric drivers. Over-tightening can easily strip the threaded inserts built into the hardwood or crack the wood panels. Anatomy of the Parkland Crib
This guide provides an enhanced, step-by-step approach to assembling the Babi Italia Parkland
| | Purpose | Better Option / Pro Tip | | :--- | :--- | :--- | | Phillips Head Screwdriver | For driving the vast majority of screws. | Use a cordless drill/driver with the clutch set to a low setting . This speeds up assembly and prevents accidental overtightening, which can strip the screw or damage the wood. | | Allen Wrench | For securing hex bolts. | While one is often included, a multi-tool with Allen bits or a T-handle Allen wrench offers better leverage and is much easier on your hands. | | Measuring Tape | To verify alignment and ensure the crib is square. | — | | Level | To make sure the crib is perfectly even and doesn't wobble. | A small, simple spirit level is ideal. | | Hammer or Rubber Mallet | For gently tapping dowels or joints into place. | A rubber mallet is safer, as it won't mar the wood like a metal hammer can. | | Work Gloves | To protect your hands from splinters and sharp edges. | — | | Small Containers / Ziploc Bags | To keep screws, bolts, and other small parts organized. | — |
(sold separately). Lower the mattress to its lowest setting. Full-Size Bed ⚠️ Do not use power drills or electric drivers
Clear a large area in the nursery. You need room to lay out parts without stepping on them.
: April 2026 Status : No official support available – community and archival methods required.
If the crib wobbles, ensure you used the lock washers (the split rings) alongside the flat washers. These prevent bolts from vibrating loose over time. | Use a cordless drill/driver with the clutch
: Unscrew the feet from the footboard and reattach them directly to the stabilizer bar or the ends of the side rails.
Thread them hand-tight into the pre-installed metal inserts on the side frames. Step 3: Mount the Metal Mattress Support Spring
: Remove the toddler guardrail while keeping the mattress at the lowest position. | While one is often included, a multi-tool
After assembly, shake the crib vigorously. It should feel rock-solid. Any loose, rattling, or wobbly joints must be tightened. 4. Converting to a Toddler Bed (Future-Proofing)
: Check that all bolts are fully tightened but do not overtighten, as this can crack the solid wood. Future Conversions bulletin no. ai-801-00 - Evolur Baby Furniture
Attach the side rails to the headboard and footboard using the provided screws and/or bolts.